SUPER PC | Multiple Monitor Setup Instructions
While computer is off, plug in the amount of monitors that you wish to use, into
the back of the computer. It doesn't really matter which port you plug each monitor.
Then, turn on the computer. All of the monitors may not come online until you set
them up in the display settings located in your Control Panel.
Start Menu > Control Panel > Display > Settings Tab
1) For Windows XP - Right Click on your Desktop and select Properties from menu.
(Or you can Choose Display Settings from the "Classic View" Control Panel)
Windows Vista - Right Click on your Desktop and select Personalize from menu.
Then choose Display Settings.
2) A small window will pop up. Choose the tab that says Settings at the top
right of the window. Then you should see the following dialogue window.
3) Seperately, click on each numbered blue box to highlight it, and check
the box that says Extend my Windows desktop onto this monitor.
After you enable all of the monitors, click the Apply button. All of the
monitiors should come online, if they were not already on. Make sure to
set all monitors to 32-Bits. We recommend using the your monitor's native
resolution for the best video performance.
4) Next, click the Identify button. You will see a number on each blue screen.
Use this to guide you, to drag and arrange the Blue Numbered Boxes, into
the configuration that you would like. Then click Apply again.
That should do the trick! You won't have to set this up again, unless you want to
change your monitor arrangement. It will automatically remember your settings
every time you restart your computer. Now it's time to have some amazing fun!
